Oil mist filters for rotary vacuum pumps
EM-Tec KF/NW vacuum connection hardware
Vacuum oil for rotary vane pumps
Oil mist filters for rotary vacuum pumps
Reduce oil mist and reduce noise level from rotary vacuum pumps
Introduction
The EM-Tec oil mist filter are useful to eliminate or reduce oil mist emitted by single or dual stage rotary vacuum pumps. They can be used for pumps with a capacity ranging from 1 – 14 m3/hr. They are compatible with rotary vacuum pumps which are used for lab equipment such as SEMs, mass spectrometers, coater systems, small vacuum ovens and drying systems. They are equipped with cartridges which can be replaced as needed. For ease of connection they comprise the standard KF/NW 16 or KF/NW 25 vacuum flanges. Additionally available are the oil mist filters with ½” and 1” female G thread (BSPP).
Features of the EM-Tec oil mist filters are:
- Easy connection with KF/NW 16 and KF/NW25 flanges
- Additionally available with ½” and 1” female G thread
- Replaceable cartridges
- Quick cartridge replacement
- Reduce oil mist and reduce noise level of rotary pumps
- Full metal construction for oil mist filters ME16 and ME25
Specifications of the EM-Tec oil mist filters for rotary vacuum pumps:
Model |
ME 16 |
ME25 |
MMF4/KF16 |
||
Product number |
64-003122-16 |
64-003122-G |
64-003125-25 |
64-003125-G |
64-003012 |
Pumping speed range |
2 – 8 m3/hr |
4-14 m3/hr |
1- 2 m3/hr |
||
Connection |
KF16 |
½” G (BSPP) |
KF25 |
1” G (BSPP) |
KF16 |
Replacement cartridge |
64-003123 (Ø65x69mm) |
64-003126 (Ø98x70mm) |
64-003013-5 |
||
Height |
120 mm |
90 mm |
130 mm |
110mm |
110 mm |
Diameter |
101 mm |
101 mm |
145 mm |
145mm |
30 mm |
Weight |
750 g |
630g |
1235 g |
1025 g |
110 g |
Service temperature |
5 – 40 °C |
||||
Ordering information for the EM-Tec oil mist filters for rotary vacuum pumps
|
|
|
|
|
|
|
|
